2017/11/27

5 Winners’ work of eSUN and Pinshape contest!

You must remember that eSUN and Pinshape contest has started at the beginning of November. Till now, hundreds of makers have submitted their works in Pinshape.

It’s been weeks now of our Pinshape contest. Many works of winners has been released now and here we are going to share the winning works of week 1.

Pinshape winners’ work of week 1

Pumpkin Monster – 3D Printed by David Blue

Material Type: PLA

Layer Height: 0.1 mm

Extrusion Temperature: 195.0 °C

Infill: 20.0 %

Supports: Yes

This design was a fun challenge to test print limitations. The model is split in 4 parts, base, main body, head and cap. It’s designed to house a light in the head with a hollow leading down the body and out under the base for cables and a cavity in the base to house a battery.

The Tudor Rose Box (with secret lock) – 3D Printed by Kuasimoddo

Print Time: 19 hr(s)

Material Type: PLA

Layer Height: 0.2 mm

Print Speed: 40.0 mm/s

Extrusion Temperature: 200.0 °C

Infill: 20.0 %

Supports: No

This design is called the Tudor Rose box. The designer has tried to create an effect of heavy wood carving that was popular during the Tudor period.

The box also has a secret lock – slide the front panel to the right and the box unlocks – close the lid and slide the panel back again and it locks.I have written some detailed instruction on how to assemble this model.This model prints support free.

Superman Low Poly – 3D Printed by e1saquickchanger

Print Time: 7 hr(s)

Material Brand: eSUN

Material Type: PLA+

Layer Height: 0.1 mm

Print Speed: 60.0 mm/s

Extrusion Temperature: 200.0 °C

Infill: 10.0 %

Supports: Yes

This is the superman file of batman vs superman lowpoly models. It’s a very easy to print. The STLs has been grouped by color.If you want, you can print your superman in one colorand paint it by hand, as you can see superman’s face and hands are matched to the skin color.

Bleach Mask – 3D Printed by The 3dMaker

Print Time: 24 hr(s) 30 min(s)

Material Type: PLA

Layer Height: 0.18 mm

Print Speed: 50.0 mm/s

Extrusion Temperature: 205.0 °C

Infill: 20.0 %

Supports: Yes

This is an anime Bleach mask from a Japaneseanimetelevision serieswhichfollows the adventures ofIchigo Kurosakiafter he obtains the powers of aSoul Reaperand take on the duties of defending humans from evil spirits. This mask is printed and installed together with excellent details, especially the tooth. It is a perfect prop is you are Bleach fan!

Black Swan v2 – 3D Printed by darryl_ricketts

Print Time: 8 hr(s)

Material Brand: eSUN

Material Type: PLA

Layer Height: 0.15 mm

Print Speed: 35.0 mm/s

Infill: 20.0 %

Supports: Yes

Her nickname is ‘Black swan’. She’s a famous rogue with a big reward on her head. But it’s a bad day… she was blocked in a dead end in the downtown of the city. The city guards want the reward and are trying to catch her.This is the scene she is about to fight. It was printed with PLA and coated with a clear spray polyurethane to protect the paint. It was still wet when photographed and then dried to a nice matte finish!

These are the five winners of week 1! Come and submit your work to win some eSUN filaments! You can also join Pinshape now and buy filaments from Amazon with a special coupon: PINSHA15.

Contest Website：https://pinshape.com/contests/print-to-win-esun-filament